Local CDLA Feed Mill Truck Driver/Drive trainee 2nd Shift

SEARCH MORE JOBS

Needs:1

Pay:Drivers start at $26.35/hr will move to piece rate

Hours: Starting off it will be 7am to 3:30 with a 30 minute lunch during the interview process the LiveHaul Manager and Supervisor will discuss the typical day and hours of our LiveHaul Drivers

Day of the week:Typically Monday through Friday. They will need to be open to working periodic Saturdays and Sundays as business needs require.

Trucks:Manual

General Description
This position is responsible for performing daily PM checks on truck and trailer; driving to and from various farms to deliver and or pickup or load feed as scheduled.

essential job functions
  1. Responsible for having current CDL driver license, pass DOT physical every 2 years.
  2. Perform daily PM checks on truck and trailer including and complete DOT pre-trip inspections as required by DOT.
  3. Responsible for leaving at designated time and driving to appropriate location.
  4. Pull truck on scale deck to be loaded.
  5. Pull air valve on side of trailer to open lids.
  6. After trailer is loaded, blow excess feed off while standing on catwalk using air wand.
  7. Close lids on trailer by pushing knob on same air valve as was used to open the lids.
  8. Drive truck to the farm
  9. At the farm open feed bin lids by pulling the chain or lever.
  10. Unload feed as stated on the ticket by opening bin gates on the trailer.
  11. After unloading, close all bin gates on the trailer and all bin lids at the farm.
  12. Driver returns to the mill to reload.
  13. Driver responsible for refueling and post trip inspection after last load.
  14. During snow and ice the driver is required to chain or unchain tires as required to safely arrive to and from destination.
  15. Clean scales of feed spillage.
  16. Perform miscellaneous duties associated with this job classification.

equipment/clothing used to perform job
  1. Safety Vest
  2. Load tickets
  3. CB Radio
  4. Goggles
  5. Gloves
  6. Pump Sprayer
  7. Antifreeze & Oil
  8. Tire Chains
  9. Corn Scoop
  10. Computer


SIgnificant worksite measurements
Hours worked: 7 to 14 hours per day. CMV driver may drive 11 hours after 10 hours off duty; may not drive beyond the 14th hour after coming on duty, following 10 hours off duty; may not drive after 60/70 hours on duty in 7/8 consecutive days. Driver may restart a 7/8 consecutive day period after taking 34 or more consecutive hours off duty.

Breaks: As needed.

Work Environment:
  1. Steps of cab of truck are 14, 18 and 19 inches high. The wheel is 44 inches high
  2. Climb steps
  3. Climb ladder
  4. Approximately 20 pounds or less of force used to operate pump sprayer.
  5. Opening the doors requires reaching no higher the eye level.
  6. Average of 5 runs possible per shift
  7. Average one way trip to the farm varies from 10 to 60 minutes.
  8. Checking water in radiator requires reaching up 39 inches vertically.
  9. Checking oil requires horizontal reach up to 33 inches. Oil poured in at 43 inches.
  10. Open truck hood is approximately 70 pounds pull force and closing requires push up to 40 pounds.
  11. Gallon of antifreeze or oil weighs 8 pounds
  12. Antifreeze is added at 66 inches and stepping on the tire at 39 inches can possibly reduce the amount of reach.
  13. Air and electrical lines are unhooked at 59 to 61 inches high.
  14. Able to lift up to 50 pounds. Lifting, twisting, reaching and turning body, head and neck.
  15. Work in hot, cold, humid, and wet environments.
  16. Average number of times climbing in or out of the truck is 30 to 35 times during the shift.

CRITICAL JOB DEMANDS
The following information describes the physical activities that are performed during the normal work day by the team members performing this job classification. The percentage of the normal work day that the physical activity is conducted will be identified as follows:


**Rarely 1-5% of the time in an eight (8) hour work day
**Occasionally 6-33% of the time in an eight (8) hour work day
**Frequently 34-66% of the time in an eight (8) hour work day
**Continuously 67-100% of the time in an eight (8) hour work day

1. Grip (occasionally) grip with a force up to 25# to place bag into box.
2. Reach (frequently) reach up to 24" to retrieve boxes.
3. Reach (occasionally) reach up to 73" to pallet to retrieve empty boxes.
4. Push (frequently) push with a force up to 5# to push to conveyor belt.
5. Forward bend (occasionally) required to forward bend to remove product to obtain proper weight.
6. Stand (continuously) stand to check weight, pack boxes, and transfer boxes on conveyor.
7. Walk (occasionally) walk a few steps at a time when retrieving empty boxes.
8. Vision (continuously) needed to perform job duties.
9. Balance (continuously) good balance needed to walk safely on wet, slippery floors, and move safely within work space.
10. Coordination (occasionally) needed to read weights on scales, pack boxes adequately, and retrieve boxes.
11. Walking (rarely) Required to walk to and from break area and to work stations.

This job description is not necessarily a complete list of all job requirements or working conditions. The employer has the right to modify essential job functions, physical demands of the job and job qualifications at any time.

The functional job description as written for the position of Feed Mill Driver is an accurate reflection of the job and the critical demands.
Pay Range: - , General Benefits:

None

Must be able to pass both tests Urine and hair follicle. Must have a valid Class A Commercial Driver's License in the State of Tennessee CDL must not have restrictions or limitations.Age 21 or older. Must have nine months or more of verifiable Tractor Trailer driving experience within the last 12 months, or 12 months verifiable tractor trailer driving experience within the last 10 years. Must be able to pass a DOT physical exam and drug screening as outlined in the DOT regulations.

LeadFlex Job ID: 698568

External ID: 373068

Post Date: 05/01/2026

APPLY NOW CALL 866-683-6124

Short Form

Verified
Opt-in